Netgear routers are enabled to the default Router mode during the initial setup. However, you can also set up your Netgear router to Access Point (AP) mode. When your router is in Access Point mode, it acts as a gateway for the wireless devices to connect. AP mode enables your router to extend its existing WiFi network instead of creating a new one. You can Access Point mode to:
- Set up your Netgear router as an access point.
- Add an AP router to your existing WiFi network.
- Use another router to extend your network.
Now, you are aware that by setting up your Netgear router in AP mode, you will be able to extend your present WiFi network provided by your Internet Service Provider. Let’s find out how to set up your Netgear router to Access Point mode.
Step-by-Step Guide to Set Up Your Netgear Router to Access Point Mode
- Plug your Netgear router into a working electrical outlet and turn it on.
- Ensure that all the LEDs on your Netgear router are glowing green.
- Turn on your PC or laptop and launch a web browser you prefer to use.
- Go to the address bar of your web browser and access the 192.168.1.1 login page.
- As soon as you log in to your router, the Basic Home screen will appear.
- Go to the Advanced tab and then Advanced Setup.
- Select the Wireless Settings option under the Advanced Setup option.
- Scroll down and select Enable AP mode in the AP Mode section.
- Go to Choose IP Address settings on this point.
- Select Get dynamically from existing router option.
- Click on the Apply button.
- Your Netgear router is now set up to Access Point mode.
That’s all you have to do to enable AP mode on your Netgear router. However, some users might run into trouble while doing so. Thus, keep the following points in mind while setting up your Netgear router to AP mode:
Have a Blazing Fast Internet Connection
A poor internet connection can cause you a lot of trouble while setting up your router to AP mode. Thus, make sure that you are having a strong internet connection. Contact your Internet Service Provider to verify if the issue is from his side. In case it is, ask him to fix it as soon as possible.
Maintain a Strong Connection Between Your Router and Modem
Another thing you need to keep in mind is to maintain a strong connection between your Netgear router and the modem. If you have connected them using the wireless mode then use an Ethernet cable to connect your router and modem. Doing so will make a secure connection between them. Also, don’t forget to check if the connection is finger-tight.
Enter the Correct IP Address of Your Router
If you enter the incorrect IP address of your Netgear router to log in to it, you will end up having trouble enabling AP mode on it. Thus, if you fail to access the Netgear router login page via 192.168.1.1, try the IP address 10.0.0.1 to log in to your router.
Use an Updated Web Browser
You will face issues while enabling AP mode on your Netgear router if the web browser you are using is outdated. Therefore, it is advised to update the web browser before initiating the process to avoid any hassle. Also, clear the browsing history, cache, and cookies from your web browser for a stress-free experience.
Don’t Run Your Netgear Router on An Obsolete Firmware
If your Netgear router is running an obsolete version of the firmware, it will prevent you from accessing the router login page. Thus, update the firmware of your Netgear router to its latest version via web user interface or using the Netgear Nighthawk app.
Perform Netgear Router Setup Properly
If you haven’t properly set up your Netgear router, it is time to do it properly. Access 192.168.1.2 to log in to your Netgear router and follow the on-screen instructions to complete the setup process.
Conclusion
With these guidelines, you will be able to set up your Netgear router to AP mode. On the off chance, if the above tactics fail to work, reset your Netgear router and perform Netgear router setup from scratch.
Read Also – How Generic Medicine and Telemedicine are Completely Different
